roland mdx 40a

when srp player gives the error

srp player install the driver for the cutting machine

install the drivers, and as port give "FILE"


source

http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/RSPG-SB00055_SRPPlayer.pdf



To convert an image to engraving use
zsurf4


to engrave pcb

extract
eagle_files4rol­and_modela.zip
from source

add



[FABLAB_MILLING]
Type = PenPlotter
Long = "Roland Modela MDX-40"
Init = "PA;PA;VS1;!VZ4;!MC1;!PZ-25,800;\n"
Reset= "PU0,0;!MC0;\n"
Move = "PU%d,%d;\n"
Draw = "PD%d,%d;\n"
ResX     = 2540
ResY     = 2540


[FABLAB_DRILLING]
Type = PenPlotter
Long = "Roland Modela MDX-40"
Init = "PA;PA;VS1;!VZ2;!MC1;!PZ-50,800;\n"
Reset= "PU0,0;!MC0;\n"
Move = "PU%d,%d;\n"
Draw = "PD%d,%d;\n"
ResX     = 2540
ResY     = 2540


scale=1







add

[FABLAB_MILLING]
Type = PenPlotter
Long = "Roland Modela MDX-16/MDX-20"
Init = "PA;PA;VS1;!VZ4;!MC1;!PZ-10,100;\n"
Reset= "PU0,0;!PZ20,0;PD0,0;!MC0;\n"
Move = "PU%d,%d;\n"
Draw = "PD%d,%d;\n"

[FABLAB_DRILLING]
Type = PenPlotter
Long = "Roland Modela MDX-16/MDX-20"
Init = "PA;PA;VS1;!VZ2;!MC1;!PZ-20,100;\n"
Reset= "PU0,0;!MC0;\n"
Move = "PU%d,%d;\n"
Draw = "PD%d,%d;\n"

to the end of /opt/eagle-6.4.0/bin/eagle.def

in the CAM processor,
scale =2.5
offset=board width * 2.5\

on the three tabs

source:http://mlab.taik.fi/paja/?p=1874


to launch the job use
http://www.rolanddg.co.za/SupportPage/EGX-20/DropOut.zip

source:
http://www.rolanddg.co.za/SupportPage/MDX-40A.html