LINUX
if you get error
Error (209053): Unexpected error in JTAG server -- error code 89
Error (209012): Operation failed
add the file /etc/udev/rules.d/98-altera.rules with the following content
# USB-Blaster
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", SYMLINK+="usbblaster/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6002", MODE="0666", SYMLINK+="usbblaster/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6003", MODE="0666", SYMLINK+="usbblaster/%k"
# USB-Blaster II
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="0666", SYMLINK+="usbblaster2/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="0666", SYMLINK+="usbblaster2/%k"
source: http://www.alteraforum.com/forum/showthread.php?t=41657
WINDOWS
if panel gives errors for the DLL
"Load DLL (TERASIC_JTAG_DRIVE.dll) fail"
"Fail to connect to FPGA board"
add the bin directory of the quartus software to the system path (control panel)
source: http://www.alteraforum.com/forum/showthread.php?t=24461
if you get error
Error (209053): Unexpected error in JTAG server -- error code 89
Error (209012): Operation failed
add the file /etc/udev/rules.d/98-altera.rules with the following content
# USB-Blaster
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", SYMLINK+="usbblaster/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6002", MODE="0666", SYMLINK+="usbblaster/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6003", MODE="0666", SYMLINK+="usbblaster/%k"
# USB-Blaster II
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="0666", SYMLINK+="usbblaster2/%k"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="0666", SYMLINK+="usbblaster2/%k"
source: http://www.alteraforum.com/forum/showthread.php?t=41657
WINDOWS
if panel gives errors for the DLL
"Load DLL (TERASIC_JTAG_DRIVE.dll) fail"
"Fail to connect to FPGA board"
add the bin directory of the quartus software to the system path (control panel)
source: http://www.alteraforum.com/forum/showthread.php?t=24461
This help me a lot :-)
ReplyDeleteThank you very much
ReplyDelete